Thank you for listening to episode 274 of the Welding Tips and Tricks Podcast!  This week we're talking about Tungsten Angles.  We asked for topic ideas on Instagram last week and this was one of the many replies we received.  We go all over the place with this topic but really cover a lot of ground.  Hope it helps!  Have a great week and if you enjoy the show please subscribe on your favorite podcast apps and also share the show with others!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 273 of the Welding Tips and Tricks Podcast!  This week we're talking about product development!  All three of us have developed a product of some kind and brought it to a small market.  We thought it would be fun to talk about some of the experiences we've had during that time and hope this conversation might spark a fire in you to bring your idea for a product to life!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thanks for listening to the Welding Tips and Tricks Podcast!  For this week's guest we had Aaron Biefer better known as @Bulldogwelding on Instagram!  Aaron has been a good friend of ours for a long time but we've never really known what he did for his day gig, until now!  We hope you enjoy this chat with Aaron and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 271 of the Welding Tips and Tricks Podcast!  This week we're talking about Stick Rods!  Jody had recently posted a video on YouTube about different stick rods and we thought we could continue the conversation and see where it went.  Hope you can pick out a few good nuggets to help you along your way!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 270 of the Welding Tips and Tricks Podcast!  This week we had a fun chat with Mike Best from @bestfabllc on Instagram.  Mike has an interesting story on how he got into welding and started his own business.  Also, how he met Jody for the first time.  We hope you can pull a few nuggets out of this episode to help you along the way!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 268 of the Welding Tips and Tricks Podcast!  This week we're talking about some tricks you can do to get a consistent weld.  Brad Goodman joins in on this conversation to add some insight.  We hope that this episode helps you start laying more consistent beads!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 267 of the Welding Tips and Tricks Podcast!  This week's episode we're keeping up with our tradition by looking ahead to the upcoming year, at least that's how the episode starts.  It takes on it's on topic but overall keeps the theme.  Hope everyone has great plans for 2022 and looking forward to seeing them all come to life!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to ep 266 of the Welding Tips and Tricks Podcast!  For this week's episode we're taking a minute to look back over the past year and reflect on how it went.  We like to do this every year and think you should take the time to do it for yourselves.  Hope everyone had a great holiday season and thank you for understanding our holiday vacation break!  It's good to be back at it!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Hey Everyone!  Just a heads up that we'll be back next week with our looking back over 2021!  We enjoyed our time off and took an extra week with New Years and all but looking forward to getting back to it for 2022!   If you're looking for something to listen to be sure to head over to the ArcJunkies Podcast and give this week's episode (206) a listen.  Jason had a really good conversation with Mike Miller about a dark part of our industry and blue collar workers in general.  Drunks and Alcohol can be a really big problem for some of us and we wanted to make sure that everyone hears this.  This episode is not family friendly but well worth a listen.  If you're new to the trade you really want to listen to this one!

Thanks for listening to this week's episode of the Welding Tips and Tricks Podcast!  We're on a little vacation from recording but still wanted to put out an episode so we're going to be reposting a few from the past over the next few weeks.  This week we're looking back at the conversation we had with Micheal Brandt from Garage Bound, LLC.  Micheal has a crazy story and well worth a second listen!  Thank you for all the support and have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Hey Everyone! This is just a little heads up to let you know that we are going to be taking a little vacation during the 2021 holiday season.  During this time we are going to be spending some quality time with our families along with coming up with ways to improve the podcast for 2022!  We hope everyone has a great holiday season and is able to also slow down a bit to be with their families, too.    Thank you for the last 5 years of support!  We are looking forward to the next few weeks being off but also looking forward to what is to come with the podcast in 2022!

Thank you for listening to episode 265 of the Welding Tips and Tricks podcast!  For this week's chat we started off with a topic of the Science of Tig Welding and just let it go from there.  This one will be good for those that are a bit new to Tig welding!  Hope this one helps you a bit!  Have a great week everyone!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 264 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about safety.  This topic got brought up because one of us had a little accident and we thought it would be a good time to remind everyone to slow down a bit to think.  We hope this episode will do just thinking plus help you remember a few things that might have happened to you in the past.  It is very easy to become too comfortable in this industry and something happens in a blink.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 263 of the Welding Tips and Tricks Podcast!  This week we had a very interesting conversation with Ray Hebert from MagSwitch all about welding around a magnetic field.  We definatly learned a lot and know you will, too!  Be sure to check out these tools over on their site Mag-Tools.com.       If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 262 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about keeping a welding journal or different types of notes.  What do we think of this and do we do it ourselves?  Hopefully, this episode will help you decide if you'd like to jot down things a little more.  Have a great week and thank you for all the support!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 261 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about 5G tests over 6G tests.  This chat started over a text between us three and we thought it would be a good idea to dive a little deeper into why companies might use different tests instead of just one that should cover almost all of it.  Hope this one helps a bit!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 260 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about something that we all at some point have dealt with, back pain.  Generally, it all started when we were younger and dumber thinking we could lift the world and slipped that one time...  Now older, that one stupid mistake plagues you ever so often.  We thought it would be a good time to talk about this to remind everyone to take a minute to slow down and think about what you're doing.  Could you use a crane for this, get some help, a forklift?  Hope this episode helps in some way!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 259 of the Welding Tips and Tricks Podcast!  This week's episode is all about staying productive and some of the things we have tried to help improve our productivity.  If you're running your own business you know that you wear many hats and you also understand the more productive you can be the more money you can make on each job.  Hope this episode can help!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to this week's episode!  We get asked all the time about different filler wire selection so we thought it would be a good time to do an episode!  Hope this one helps you when something strange comes up!  Have a great week everyone!     If you're headed to FabTech have a great time!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!